The StudioMP3 player interface plays MP3 files
loaded onto a flash drive and streams the audio to the Procaster™
via its 600 ohm stereo-blended mono output. It features full
stereo input/output capability for other applications including
stereo FM transmitters.
Using your PC, simply drag and drop files onto
the included 2GB* flash drive to generate hi-fi stereo sound
at the 'Line output' connector.
A 4 position terminal block provides audio (left
and right channels mixed to provide a mono 600 ohm signal
with level adjustment) and power to the Procaster™ AM
transmitter or other device.
An external audio source (such as a mixer) can
be fed to the stereo 'Line input' which can be routed through
to the 'Line output' and 600 ohm output.
Commercial quality construction combined with
high 'uptime' design guarantees reliable operation.
* The included 2 GB flash drive plays 33 hours
at 144kps (CD quality music) or 150 hours at 32kbps (speech).
Bigger flash drives provide longer run times - enough to run
an isolated radio station for days.
Easy to use - switch between 3 modes of operation:
1. Sequential - Play MP3 files one after another and then
repeat sequence over forever.
2. Shuffle - Play MP3 files randomly forever.
3. Line - Feed stereo line audio from an external audio source
to your transmitter.
|
